FULL CARTON - 32 x Small Blank Panoramic (10cm x 20cm) Sublimation Photo Slates with Stands
FULL CARTON - 32 x Small Blank Panoramic (10cm x 20cm) Sublimation Photo Slates with Stands is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
- SAVE UP TO 10% by purchasing a full carton of photo slates rather than single pieces
- Our photo slates are made from the highest quality natural slate.
- They are coating on one side with a bright white glossy finish (not matte finish)
- Slightly wider and thinner shape than our standard landscape photo slates for creating unique and eye-catching photo gifts
- Printable area of 9cm x 19cm
- Available in full cartons of the larger 16cm x 30cm size as well
- Please note that the sizing for slate products can vary as it is a natural product
Troubleshooting and Tips
Do not apply too much pressure to these photo slates as they will crack in the press.
If you are not getting even results across the full surface of the photo slate we suggest recommend using a thin silicone matt here (roughly 1.5mm thick) that is contact with the printing surface when pressing. This will help to take care of any minor differences in the surface level of the photo slate helping you create consistent transfer prints.
If heating face up with this silicone heat mat you will need to change the heating time to roughly 5 minutes rather than the time mentioned below.
Troubleshooting & Tips
Troubleshooting & Tips
We have tested these photo slates and recommend pressing them upside down so that the heat goes through the back of the photo slate. Heating the paper directly can cause the paper to burn and the result will not be as required.
If you are not getting good results by heating through the slate you can also heat the slate face up i.e. heating the sublimation paper directly. However if you are doing this please ensure you halve the heating time listed below. e.g. if it says 8 minutes change this to 4 minutes.
We always recommend using our 2mm thin silicone FAB Pad so that you can sublimate on the rough edges of the slate to create a seamless image.
Larger slates are generally not suitable for clamshell presses as placing the slate too close to the hinged area can apply too much pressure and crack the slate. Swing away presses are best suited for this.
We also recommend pre-heating slates if they have been stored in a colder area as the sudden temperature change can cause cracking.
FULL CARTON - 32 x Small Blank Panoramic (10cm x 20cm) Sublimation ...
-
Pressing Time
-
Temperature
-
Pressure
-
Equipment
-
Material
-
Dimensions
-
Finish
-
Colour
-
Print Applications
